 COLORMAKER
MSDS SHEETS
|
 |
 |
PENTIMENTO |
|
|
A cement based compound
when combined with Cp1000 acrylic activator produces a
unique high strength cementitious floor topping. Designed
to resurface existing concrete and thus restore it back
to original condition. |
|
|
SGRAFFINO |
|
|
A cement based compound
that provides a grainer concrete surface and can be applied
at paper-thin thickness. When combined with pure Cp1000
acrylic activator, this product produces the ideal ultra
thin resurfacer for both interior and exterior concrete
applications. |
|
|
CP1000 |
|
|
A high solids, cross-linking acrylic
emulsion. It is used as a polymer modifier for Colormaker's
dry cementitious toppings. Cp1000 acts as a primer and
activator used with cementitious products for interior
and exterior surfaces. |
|
|
PATINAETCH
SELECT
COLOR TO VIEW MSDS SHEET |
|
|
A mildly acidic
water based solution designed to etch and stain concrete
or masonry substrates. The chemical reaction with the
substrate results in naturally variegated earth tones
similar to the oxidation of a copper roof or the patina
of a bronze sculpture.
|
|
|
DESO DYES |
|
|
DESO dye concentrates are high-strength
penetrating solutions of primary colors intended to make
ready-to use dye stains by blending to the desired color
and may be mixed with acetone and/or water. They can be
used to create a range of affects from subtle earth tones
to vibrant hues. Colors are sharp and translucent. |
| |
SMITH PAINTS MSDS SHEETS |
|
|
SMITH COLOR FLOOR |
|
|
A decorative coating for concrete
surfaces. Smith’s Color Floor is water submersible,
alkali, weather and UV light resistant. These stains require
a top coat and are compatible with solvent-based, water-based,
single and two component products, including but not limited
to urethanes, acrylics and epoxy clear sealers. |
|
|
SMITH COLOR WALL |
|
|
Extra strength stains
developed to achieve a low sheen natural appearance on
vertical porous surfaces. Smith’s Color Wall is
water submersible, alkali, weather and UV light resistant.
This stain system is compatible with a variety of sealers,
including but not limited to solvent-based, water-based,
single and two component urethane, polyurethane and epoxy.
Smith’s Color Wall is not compatible with Methyl
Methacrylate or penetrating (sodium silicate) sealers. |
|
|
SMITH CLEANER CT-8
|
|
|
Smith’s Cleaner
& Toughener, “CT-8” is a dual purpose
product designed for the preparation of concrete surfaces
to receive Smith’s Color Floor. Initially, CT-8
acts as a detergent to clean the concrete surface. Secondly,
CT-8 toughens the surface of the concrete by interacting
with weak spots created by un-reacted calcium hydroxide.
CT-8 is biodegradable but should not be discharged as
a powder or an undiluted cleaning solution directly into
streams, ponds, lakes, etc. |
| |
|
|
| |
|
 |
|
To
view PDFs, click
here to download Acrobat Reader for free.
|
|
